How To Make A Pac Man Costume

Print

Kids PAC MAN Halloween Costume

This DIY PAC MAN Halloween costume is sure to stand up out when your child is trick or treating! Cheap to make, and fun to put together.

Keyword kids halloween costume, no sew halloween costume, pac man costume

Cook Time 2 hours

Total Time 2 hours

Servings 1 PAC Homo costume

• Cardboard
• Roll of cheap duct tape
• Bag of Glue Sticks
• Spray Paint black, yellow, pinkish, blue, orangish, red & blue
• Hot Glue Gun
• Exacto Knife/Box Cutter
• Ruler
• Direct Edge
• Hula Hoop or other large circumvolve to trace
• Projector if possible for the ghosts

Instructions for PAC-MAN:

• Utilise a hula hoop or other big circular object as a template to trace the circle for PAC-MAMeasure the diameter to figure out the true center, then create an accurate size mouth by drawing out the triangle from there.

• For the arm hole, trace the duct tape circle, but you could try other plates or saucers to meet what works best, depending on the size of your kid. In one case you have traced the circles, cut them out advisedly with an exacto knife.

• For the connecting eye, mensurate from shoulder to shoulder (on this cutie pie information technology was ten.") and then add together ½" - one" of wiggle room.  Cut your connecting eye so the cardboard is horizontal.  This way it tin roll and take shape.

• Once you have your center cutting, curlicue it up then it volition take shape easier.  Next make a line ½"  on each side.  Have a bract and make cuts upwardly to that line, bending inward as you go. It also helps to score this line from top to bottom (cut, merely non all the style through) so the edges bend easier and make for a cleaner fold/line.

• Brainstorm your associates.  Nosotros hot glued and duct taped the pieces together.

• The mouth section should be made of stiffer carte board, so mensurate and cut that separately.

• In one case all of the assembly is complete, it's time to paint!  I used spray pigment for the ease & quickness of it.

• Leave the black mouth pieces unassembled and spray paint those separately.  You can add these once the entire yellow piece is painted and dry.

Instructions for Ghosts:

• I plant a moving picture of the ghosts online and used a projector to trace out the shape in cardboard.

• Cut them out and and so spray paint the cardboard.

• The eyes were washed with paper cut outs that we printed.

Tip: We got all of the paper-thin for free at Smart & Final, just any bulk item store
should have it. (Costco) Usually there volition be some slip sheets in the
metallic box bins or between the water pallets but you merely have to ask.

This DIY PAC MAN Halloween costume is sure to stand up out when your kid is play tricks or treating! Cheap to brand, and fun to put together. Make some ghosts for Mum and Dad to wear too!

Halloween is coming! With that in mind, fifty-fifty if you don't think you're the DIY costume blazon, what most giving information technology a try this year?  I teamed up with ii friends to make costumes for our kiddos and it was so much fun.  I definitely stretched my DIY skills and had a blast in the process. (You can see Parker'due south costume hither!)  So without further ado, a pretty cute kids costume for your consideration...  (PS. This is a super piece of cake family costume besides!)

What You Volition Need to Brand This Kids PAC-Man Halloween Costume

• Cardboard
• Curlicue of cheap duct tape
• Bag of Gum Sticks
• Spray Paint (black, yellow, pink, blueish, orange, red & bluish)
• Hot Gum Gun
• Exacto Knife/Box Cutter
• Ruler
• Straight Edge
• Hula Hoop or other big circumvolve to trace
• Projector (if possible for the ghosts)

How to Make This Kids PAC-MAN Halloween Costume

1. Use a hula hoop or other large circular object as a template to trace the circle for PAC-Human.  Measure out the diameter to figure out the true centre, and then create an accurate size mouth by drawing out the triangle from there.

2. For the arm hole, trace the duct record circle, but you could try other plates or saucers to meet what works all-time, depending on the size of your child. Once you take traced the circles, cutting them out advisedly with an exacto knife.

iii. For the connecting center, measure from shoulder to shoulder (on this cutie pie it was x.") and and so add ½" - 1" of wiggle room.  Cutting your connecting centre so the cardboard is horizontal.  This fashion it can roll and take shape.

4. Once yous accept your eye cutting, gyre it up so it will take shape easier.  Next make a line ½"  on each side.  Accept a bract and make cuts up to that line, angle in as you become. It likewise helps to score this line from top to bottom (cut, simply not all the fashion through) so the edges bend easier and make for a cleaner fold/line.

5. Begin your assembly.  We hot glued and duct taped the pieces together. The oral cavity section should be made of stiffer card board, then measure and cut that separately.

6. In one case all of the assembly is consummate, it'due south fourth dimension to paint!  I used spray paint for the ease & quickness of information technology. Leave the black mouth pieces unassembled and spray paint those separately.  Y'all can add these once the entire yellow piece is painted and dry.

Instructions for Ghosts:
i. I plant a picture of the ghosts online and used a projector to trace out the shape in paper-thin.
2. Cutting them out and then spray pigment the cardboard.
3. The eyes were washed with paper cut outs that we printed.

Top Tips for Making This DIY Halloween Costume

• Nosotros got all of the cardboard for free at Smart & Final, just any bulk item store should accept it. (Costco) Usually there volition be some slip sheets in the metal box bins or between the water pallets merely yous just have to enquire.
• There is an art to getting an even layer if you lot spray paint, and so I watched some videos on YouTube to get the technique downwards. (highly recommend) https://www.youtube.com/watch?5=qB_MtpaMYaY

PAC Human Costume for children

This is such a fun and brilliant costume for kids! It takes a little fourth dimension to brand, but the finished outcome is so worth it! Information technology'southward a great cornball costume that'southward and so like shooting fish in a barrel to recognize when y'all are out and about fob or treating!

PAC MAN Family Costume Idea

I love the idea of adding straps to the ghosts and that way Mum and Dad tin bring together in the retro game vibe as well! Why non make a Mrs PAC Man every bit well - y'all merely need to add a bow and red lips to this design!

Photography past Emily Morgan

DIY by Kathlene Linehan

Be sure to check out these other fun kids' Halloween Costume Ideas!

Miraculous Ladybug Costume DIY

DIY Toddler Costume || The Mini Yogi

DIY Halloween || Chocolate Fleck Cookie Costume

Kids Halloween Costume Ideas // Urban Jungle

Let me know if you fabricated this costume for your kids this year in the comments below!

Kids PAC Homo Halloween Costume

This DIY PAC MAN Halloween costume is sure to stand out when your kid is trick or treating! Inexpensive to make, and fun to put together.

Active Fourth dimension 2 hrs

Full Time 2 hrs

Keyword: kids halloween costume, no sew together halloween costume, pac man costume

Yield: 1 PAC Human costume

• Cardboard
• Roll of cheap duct tape
• Pocketbook of Glue Sticks
• Spray Pigment blackness, yellow, pink, bluish, orange, cherry-red & bluish
• Hot Mucilage Gun
• Exacto Knife/Box Cutter
• Ruler
• Straight Border
• Hula Hoop or other large circle to trace
• Projector if possible for the ghosts

Instructions for PAC-MAN:

• Use a hula hoop or other large round object equally a template to trace the circumvolve for PAC-MAMeasure the diameter to figure out the truthful middle, and so create an accurate size mouth by cartoon out the triangle from at that place.

• For the arm hole, trace the duct tape circle, but you could try other plates or saucers to run into what works best, depending on the size of your kid. Once you have traced the circles, cutting them out advisedly with an exacto knife.

• For the connecting middle, measure from shoulder to shoulder (on this cutie pie information technology was ten.") and then add ½" - 1" of wiggle room.  Cutting your connecting middle so the cardboard is horizontal.  This way it tin roll and take shape.

• One time you have your center cut, roll information technology up and then it will accept shape easier.  Adjacent brand a line ½"  on each side.  Accept a blade and make cuts up to that line, bending inward as yous go. Information technology also helps to score this line from acme to bottom (cut, just non all the style through) and then the edges bend easier and brand for a cleaner fold/line.

• Brainstorm your assembly.  We hot glued and duct taped the pieces together.

• The mouth section should be made of stiffer card board, and so measure and cut that separately.

• Once all of the assembly is complete, information technology's time to paint!  I used spray paint for the ease & quickness of it.

• Exit the black oral fissure pieces unassembled and spray paint those separately.  You can add these in one case the entire yellow slice is painted and dry out.

Instructions for Ghosts:

• I constitute a picture of the ghosts online and used a projector to trace out the shape in paper-thin.

• Cut them out and then spray paint the paper-thin.

• The eyes were done with paper cut outs that we printed.

Tip: Nosotros got all of the cardboard for costless at Smart & Final, only any bulk particular store
should have it. (Costco) Usually there will exist some skid sheets in the
metallic box bins or betwixt the water pallets but yous simply have to ask.

Source: https://theeffortlesschic.com/diy-kids-pac-man-halloween-costume/

Share this post